IEC 60695-2-12 (GB 5169.12) Glow-wire flammability test for materials
IEC 60695-2-12 (GB 5169.12) Glow-wire flammability test for materials
IEC 60695-2-12 (GB 5169.12) Glow-wire flammability test for materials - Standard
IEC 60695-2-12 (GB 5169.12) Fire hazard testing — Part 2-12: Glowing/hot-wire based test methods — Glow-wire flammability test method for materials
IEC 60695-2-12 (GB 5169.12) Glow-wire flammability test for materials - Scope
This part of IEC 60695 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for flammability testing to determine the glow-wire flammability index (GWFI).
The test results make ti possible to provide a relative comparison of various materials according to their ability to extinguish flames on removal of the electrically heated glow-wire and their ability not to produce flaming or glowing particles capable of spreading fire to a specified layer of wrapping tissue placed below.
The test method is not valid for determining the flammability of complete items of equipment, since the dimensions of the insulating systems or combustible parts, the design and heat transfer to adjacent metallic or non-metallic parts, etc, greatly influence the flammability of the materials used therein. In addition to this, it is not valid for determining fire behaviour and fire hazard of equipment.
IEC 60695-2-12 (GB 5169.12) Glow-wire flammability test for materials - Conditioning
The samples shall be stored for at least 48 h at a temperature of (23±2) ℃ and a relative humidity of (50 ±5 ) %.
IEC 60695-2-12 (GB 5169.12) Glow-wire flammability test for materials -test Sample
length: no less than 60mm.width ：no less than 60mm，critical thichness：0.75mm, 1.5mm, 3.0mm, 5PCS
IEC 60695-2-12 (GB 5169.12) Glow-wire flammability test for materials - relative standards
- IEC 60695-2-11-2000 (GB 5169.11) Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
- IEC 60695-2-13-2000 (GB 5169.13) Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignitability test method for materials
- UL 94 Test For Flammability of Plastic Materials for Parts in Devices and Appliances
- IEC 60695-11-10 Fire hazard testing - Part 11-10: Test flames -50 W horizontal and vertical flame test methods
- ISO 4589-2:1996＋A1:2005 Plastics - Determination of burning behaviour by oxygen index -- Part 2: ambient-temperature test
- ISO 4589-3:1996 Plastics - Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
- ISO 6722:2006 specifies the dimensions, test methods, and requirements for single-core 60 V cables intended for use in road vehicle applications
- ASTM D 2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
----------------------------------------------------------------------------------------------------------------------