聲學性能檢測
ISO 10140-3聲學.建筑物組件隔音的實驗室測定.第3部分
ISO 10140-3聲學.建筑物組件隔音的實驗室測定.第3部分—標準名稱
ISO 10140-3 Acoustics-Laboratory measurement of sound insulation of building elements—Part 3: Measurement of impact sound insulation
ISO 10140-3聲學.建筑物組件隔音的實驗室測定.第3部分:沖擊聲隔音測量
ISO 10140-3聲學.建筑物組件隔音的實驗室測定.第3部分—適用范圍
Scope：
This part of ISO 10140 specifies laboratory methods for measuring the impact sound insulation of floor assemblies. The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings. The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this part of ISO 10140 are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions, and loss factor.
ISO 10140-3聲學.建筑物組件隔音的實驗室測定.第3部分—引用文件
ISO 140-2, Acoustics — Measurement of sound insulation in buildings and of building elements — Part 2: Determination, verification and application of precision data
ISO 717-2, Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation
ISO 10140-1, Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products
ISO 10140-4, Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements
ISO 10140-5, Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment
IEC 60942, Electroacoustics -Sound calibrators
IEC 61260, Electroacoustics — Octave-band and fractional-octave-band filters
IEC 61672-1, Electroacoustics — Sound level meters — Part 1: Specifications
類似測試標準
GB/T19889.6聲學-建筑和建筑構件隔聲測量，第6部分：樓板墥擊聲的實驗室測量/Acoustics-Measurement of sound insulation in buildings and of building elements-Part 6: Laboratory measurements of impact sound insulation of floors.
ASTM E492用打擊器實驗室測量沖擊聲波通過地板和天花板組合體傳播的試驗方法/ Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
ISO 10140-1 建筑構件隔聲的實驗室測量 第1部分:特殊產品的應用規則/Acoustics — Laboratory measurement of sound insulation of building elements —Part 1: Application rules for specific products
ISO 717-2聲學 建筑物和建筑構件隔聲等級 第2部分:沖擊隔聲/Acoustics — Rating of sound insulation in buildings and of building elements —Part 2:Impact sound insulation
ASTM E2179對地板覆蓋物在降低通過混凝土地面的沖擊聲傳輸?shù)淖饔眠M(jìn)行實驗室測量的標準試驗方法/Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
----------------------------------------------------------------------------------------------------------------------
- 上一篇：ISO 10140-2 聲學.建筑物組件隔音的實驗室測定.第2部分
- 下一篇：沒有了
----------------------------------------------------------------------------------------------------------------------
