16 CFR 1610 Flammability test to clothing textiles
16 CFR Part 1610 Flammability test to clothing textiles
16 CFR Part 1610 Flammability test to clothing textiles- Standard Title
16 CFR Part 1610 Standard for the Flammability of Clothing Textiles
16 CFR Part 1610 Flammability test to clothing textiles - Scope
The Standard provides methods of testing the flammability of clothing and textiles intended to be used for clothing, establishes three classes of flammability, sets forth the requirements which textiles shall meet to be classified, and warns against the use of those textiles which have burning characteristics unsuitable for clothing.
Hereafter, ‘‘clothing and textiles intended to be used for clothing’’ shall be referred to as ‘‘textiles.’’
Specific exceptions.
This standard shall not apply to:
(1) Hats, provided they do not constitute or form part of a covering for the neck, face, or shoulders when worn by individuals;
(2) Gloves, provided they are not more than 14 inches in length and are not affixed to or do not form an integral part of another garment;
(3) Footwear, provided it does not consist of hosiery in whole or part and is not affixed to or does not form an integral part of another garment;
(4) Interlining fabrics, when intended or sold for use as a layer between an outer shell and an inner lining in wearing apparel.
Specific exemptions.
Specific exemptions. Experience gained from years of testing in accordance with the Standard demonstrates that certain fabrics consistently yield acceptable results
when tested in accordance with the Standard. Therefore, persons and firms issuing an initial guaranty of any of the following types of fabrics, or of products made entirely from one or more of these fabrics are exempt from any requirement for testing to support guaranties of those fabrics:
(1) Plain surface fabrics, regardless of fiber content, weighing 2.6 ounces per square yard or more; and
(2) All fabrics, both plain surface and raised-fiber surface textiles, regardless of weight, made entirely from any of the following fibers or entirely from combination of the following fibers: acrylic, modacrylic, nylon, olefin, polyester, wool.
(e) Applicability. The requirements of this part 1610 shall apply to textile fabric or related material in a form or state ready for use in an article of wearing apparel, including garments and costumes finished for consumer use
16 CFR Part 1610 Flammability test to clothing textiles – Test requirements
|
Class
|
Plain Surface textile fabric
|
Raised Surface textile fabric
|
|
1
|
Burn time is 3.5 seconds or more
ACCEPTABLE (3.5 sec is a pass).
|
(1) Burn time is greater than 7.0 seconds; or
(2) Burn time is 0–7 seconds with no base burns
(SFBB). Exhibits rapid surface flash only.
ACCEPTABLE.
|
|
2
|
Class 2 is not applicable to plain surface textile fabrics
|
Burn time is 4–7 seconds (inclusive) with base
burn (SFBB).ACCEPTABLE
|
|
3
|
Burn time is less than 3.5 seconds.
NOT ACCEPTABLE.
|
Burn time is less than 4.0 seconds with base burn. (SFBB).NOT ACCEPTABLE
|
16 CFR Part 1610 Flammability test to clothing textiles - Reference Standard:
- 16 CFR 1611 Standard for the flammability of vinyl plastic film
- 16CFR 1615(Size 0-6), 16CFR1616 (Size 7-14) STANDARD FOR THE FLAMMABILITY OF CHILDREN'S SLEEPWEAR
- NFPA 701:2010 Standard Methods of Fire Tests for Flame propagation of textiles and films
- CAN/CGSB-4.2 No. 27.5-2008 TEXTILE TEST METHODS Flame Resistance — 45º Angle Test — One-Second Flame Impingement
----------------------------------------------------------------------------------------------------------------------