NF D60-013 Ignitability test to seat
NF D60-013 Ignitability test to seat
NFD60-013: Ignitability test to upholstered furniture - Standard
NFD60-013 Protocol for assessment of the ignitability of upholstered furniture - Ignition source equivalent to a burning 20 g paper cushion - Coverings and upholstery materials
NFD60-013 Ignitability test to seat - Introduction
Flammability requirements for seating in France
In the French regulations for public buildings ERP, some changes have occurred for building interiors (Aménagements Intérieurs AM). Under Article AM18, the French M tests for seats in cinemas have been replaced by NF D60-013 of June 2006 (Protocol for evaluating the ignitability of upholstered seating – Ignition source equivalent to a burning 20 gram paper cushion – covers and upholstery). The burner is a smaller Belfagor burner. This standard is based on the EN 1021-3 draft, which was finally not adopted as a European standard.
NFD60-013 Ignitability test to seat - Reference standard
- EN 1021-1 Furniture – Assessment of the ignitability of upholstered furniture – Part 1: Ignition source smouldering cigarette
- EN 1021-2 Furniture – Assessment of the ignitability of upholstered furniture – Part 2: Ignition source match flame equivalent
- NFPA 267:1998/Pr EN 1021-3 Fire characteristics of mattresses and bedding assemblies exposed to flaming ignition source
- TB 117-2013：Requirements, Test Procedure and Apparatus for Testing theSmolder Resistance of Materials Used in Upholstered Furniture
- BS 7176 Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites
- BS 5852-2006:Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources
- UIC 564-2 Appendix13 Test method for determing the fire-resistance of seats
----------------------------------------------------------------------------------------------------------------------