Ability
Ability for FR Technical consulting, Research, Improving and Training:
Ability for FR Technical consulting, Research, Improving and Training:
Railway Vehicle
■ NF F 16-101 – Railway Rolling Stock Fire Behavior Choice of Materia/NF F 16-102 – Railway Rolling Stock Fire Behavior Choice of Material – Application for electrical equipment
> M Ranking (M0-M4)：
- NF P 92-510: Determination of upper calorific potential
- NF P 92-501: Safety against fire: Building materials – Reaction to fire tests. used for rigid material or flexible materials thicker than 5mm
- NF P 92-503: Safety against fire - Building materials -Reaction to fire tests - Electrical burner test used for flexible materials
- NF P 92-504: Safety against fire - Building materials - Reaction to fire tests - Flame persistence test and speed of the spread of flame.
- NF P 92-505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test.
- NF P 92-507: Fire safety - Building - Interior fitting materials - Classification according to their reaction to fire
> I Ranking (I0-I4)：
- NF ISO 4589-2：Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient - temperature test
- NF EN 60695-2-1：Fire Hazard Testing
> F Ranking (F0-F5)：
- NF X10-702：Fire test methods – Smoke emission – Test of measurement of specific optical density of smoke by the combustion or the pyrolysis of solid materials
- NF X70-100：Fire behaviour tests – Analysis of pyrolysis and combustion gases – Pipe still method
> Cabel & Wire：
- NF C32-070：Fire behaviour tests – Analysis of pyrolysis and combustion gases – Pipe still method
■ EN 45545-2: Fire protection of railway vehicles - Part 2: Requirement for fire behaviours of materials and components (EN 45545-2)
- EN ISO 1182 Reaction to fire tests for building products. Non-combustibility test
- EN ISO 1716: Reaction to fire tests for building products. Determination of the heat of combustion
- EN ISO 9239-1 Reaction to fire tests for floorings. Part 1: Determination of the burning behaviour using a radiant heat source
- EN ISO 11925-2: Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame . Part 2: Single-flame source test Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
- NF X10-702：Fire test methods – Smoke emission – Test of measurement of specific optical density of smoke by the combustion or the pyrolysis of solid materials
- NF X70-100：Fire behaviour tests – Analysis of pyrolysis and combustion gases – Pipe still method
- EN ISO 5659-2：Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test
- EN ISO 5658-2, Reaction to fire tests. Spread of flame. Lateral spread on building products in vertical configuration
- EN ISO 5660-1: Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method)
- EN ISO 12952-3: Texitile. Flammability
- DIN EN 50266-2-4： Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-4: procedures – Category C
- DIN EN 50305： Railway applications. Railway rolling stock cables having special fire performance. Test methods
- DIN EN 50306-1：Railway applications - Railway rolling stock cables having special fire performances - Thin wall - Part 1: General requirements
- DIN EN 60332-1-2：Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre-mixed flame
- DIN EN 60332-2-2：Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable Procedure for diffusion flame
- DIN EN 61034-1： Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus
Building Material
■ M Ranking (M0-M4)：
- NF P 92-510: Determination of upper calorific potential
- NF P 92-501: Safety against fire: Building materials – Reaction to fire tests. used for rigid material or flexible materials thicker than 5mm
- NF P 92-503: Safety against fire - Building materials -Reaction to fire tests - Electrical burner test used for flexible materials
- NF P 92-504: Safety against fire - Building materials - Reaction to fire tests - Flame persistence test and speed of the spread of flame.
- NF P 92-505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test.
- NF P 92-507: Fire safety - Building - Interior fitting materials - Classification according to their reaction to fire
■ EuroClasses EN 13501-1 (A1, A2, B, C, D, E, F)：
- EN 13823: Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item
- EN ISO 1182 Reaction to fire tests for building products. Non-combustibility test
- EN ISO 1716: Reaction to fire tests for building products. Determination of the heat of combustion
- EN ISO 9239-1 Reaction to fire tests for floorings. Part 1: Determination of the burning behaviour using a radiant heat source
- EN ISO 11925-2: Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame . Part 2: Single-flame source test
Aircraft Material
■ ABD 0031 Airbus Fire Test ：
- Vertical Flammability Test: ABD 0031- 7.1.2 (AITM 2.0002 B/A)
- Smoke Density Test: ABD 0031- 7.3.1 (AITM 2.0007)
- Smoke Toxicity Test: ABD 0031- 7.4 (AITM 3.0005)
- Heat Release Test: ABD 0031 (AITM 2.0006)
- Horizontal Test: ABD 0031- 7.1.3 / -7.1.4 (AITM 2.0003)
- 45° flammability test: ABD 0031- 7.1.5
■ Far 25.853 Fire test to aircraft material ：
- Vertical flammability test: 14 FAR 25.853 b(4)), (App. F to part 25 part I § (a)
- Smoke Density Test: 14 FAR 25.853 (d), (App. F to part 25, part V)
- Heat Release Test: 14 FAR 25.853 (d), Appendix F, Part IV
- Seat Test: 14 FAR 25.853 (c, App.F to part II)
- Horizontal Test: 14 FAR 25.853 b(2,3), (App. F to part 25 part I § (a),(1)
- 45° flammability test: 14 FAR 25.853 (b), (App. F to part 25, part I § (6))
Textile and Furniture
- BS 5852-2006: Ignitability of upholstered seating by smouldering and flaming ignition sources
- BS EN 1021 Furniture-Assessment of the ignitability of upholstered furniture
- EN 597: Furniture-Assessment of the ignitability of mattresses and upholstered bed bases
Motor Vehicle
- TL1010 burning behaviour-Volkswagen Standard
- 95/28/EC The burning behaviour of materials used in the interior construction of certain categories of motor vehicle
- NF P 92-505 Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test
- U.T.A.C 18-502 T1 burning behaviour of materials used in the interior construction of certain categories of motor vehicles
- FMVSS 302 Flammability of materials used in the occupant compartments of motor vehicles
Anechoic Foms
- NRL 8093 – Test procedure 1 : Anechoic foams
- NRL 8093 – Test procedure 2 : Anechoic foams
- NRL 8093 – Test procedure 3 : Anechoic foams
- NRL 8093 – Test procedure 4 : Anechoic foams
Electrical and Electronic Products
- UL 94: Test for Flammability of Plastic Materials for Parts in Devices and Applia
- NF ISO 4589-2：Plastics – Determination of burning behaviour by oxygen index – Part 2: Ambient- temperature test
- NF EN 60695-2-1：Fire Hazard Testing
- NF C32-070：Insulated conductors and cables for installation – Classification tests on conductors and cables with regards to fire behaviour
- DIN EN 50266-2-4： Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-4: procedures – Category C
- DIN EN 50266-2-5： Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-5: procedures – Category D
- DIN EN 50305： Railway applications. Railway rolling stock cables having special fire performance. Test methods
- DIN EN 50306-1：Railway applications - Railway rolling stock cables having special fire performances - Thin wall - Part 1: General requirements
- DIN EN 60332-1-2：Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre-mixed flame
- DIN EN 60332-2-2：Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable Procedure for diffusion flame
- DIN EN 61034-1： Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus
Fire Resistance Structure
- EN 1634-1: Fire resistance and smoke control tests for door. shutter and openable window assemblies and elements of building hardware - Part 1: Fire resistance tests for doors. shutters and openable windows
- EN 1363-1: Fire Resistance Tests - Part 1: General Requirements
- EN 1363-2: Fire Resistance Tests - Part 2: Alternative and Additional Procedures
- EN 1364-2: Fire Resistance Tests for Non-Loadbearing Elements - Part 2: Ceilings
- EN 1364-3: Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration
- EN 1364-4: Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
- EN 1366-1: Fire Resistance Tests for Service Installations - Part 1: Ducts
- EN 1366-2: Fire Resistance Tests for Service Installations - Part 2: Fire Dampers
----------------------------------------------------------------------------------------------------------------------
- Previous：None
- Next：None
----------------------------------------------------------------------------------------------------------------------